Casio ISA550WBUN3K9 manual Configuring Wi-Fi Protected Setup, Click Wireless Wi-Fi Protected Setup

Wireless (for ISA550W and ISA570W only)	5
Configuring Wi-Fi Protected Setup

•Active Time: Click On to enable the schedule feature for the SSID, or click Off to disable it. Disabling the schedule feature will keep the SSID active in 24 hours per day. If you enable this feature, configure the time range per day to keep this SSID active.

-Start Time: Enter the values in the hour and minute fields and choose AM or PM from the drop-down list.

-Stop Time: Enter the values in the hour and minute fields and choose AM or PM from the drop-down list.

STEP 4 Click OK to save your settings.

STEP 5 Click Save to apply your settings.

Configuring Wi-Fi Protected Setup

Use the Wi-Fi Protected Setup page to configure Wi-Fi Protected Setup (WPS) on the security appliance to allow WPS-enabled devices to more easily connect to the wireless network.

STEP 1 Click Wireless > Wi-Fi Protected Setup.

The Wi-Fi Protected Setup window opens.

STEP 2 Click On to enable WPS, or click Off to disable it.

STEP 3 If you enable WPS, specify the following WPS settings:

•WPS Configuration Status: Determines whether to start a new configuration on the SSID before the wireless client establishes a WPS connection.

-Configured: If you choose this option, the wireless clients will associate with the SSID by following the original security settings of the SSID, which may cause an un-secured connection if the SSID is not configured properly in advance, for example the security mode is set to “Open.” To provide a secured connection under the Configured status, you can manually change the security mode for the SSID in advance and then establish the WPS connection.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 219