Casio ISA550WBUN3K9 manual Mode Client Pool Range for Client Start IP, Lan, End IP

VPN	8
Configuring IPsec Remote Access

Field	Setting
Mode	Client
Pool Range for Client	Start IP: 192.168.3.2
LAN	End IP: 192.168.3.254
Client Internet	Disable
Access
WAN Failover	On

NOTE: An address object with the range 192.168.3.2 to 192.168.3.254 called “EZVPN_VPNGroup1” will be automatically created.

STEP 2 If only a single WAN interface is configured, go to the Firewall > NAT > Advanced NAT page to create an advanced NAT rule as follows.

Field	Setting
Name	VPNClient_to_WAN1
Enable	On
From	Any
To	WAN1
Original Source	EZVPN_VPNGroup1
Address
Original Destination	Any
Address
Original Services	Any
Translated Source	WAN1_IP
Address
Translated	Any
Destination Address
Translated Services	Any

STEP 3 If two WAN interfaces are configured, go to the Firewall > NAT > Advanced NAT page to create two advanced NAT rules as follows.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 361