Casio ISA550WBUN3K9 manual Traffic Meter Alert, Anti-Virus Alert

Device Management	10
Administration

Event	Description
Traffic Meter Alert	Sends an alert email when the traffic limit is reached, or before the traffic
	counter is reset.
	• Send to Email Address: Enter the email address to receive the alert
	emails.
	To enable Traffic Meter Alert, you must complete the following tasks:
	• Enable the Traffic Metering feature for both the primary WAN and the
	secondary WAN (if applicable) and specify the corresponding settings in
	the Networking > WAN > Traffic Metering pages. See Measuring and
	Limiting Traffic with the Traffic Meter, page135.
	• Configure the email server settings used to send the alert emails.
	• Check Traffic Meter Alert in the Enable column and specify the email
	address used to receive the alert emails.
Anti-Virus Alert	Sends an alert email at the specified interval to a specified email address if
	viruses are detected.
	• Alert Interval: Specify how often, in minutes, that the security appliance
	sends an alert email for virus events. Enter a value in the range 1 to 1440
	minutes. The default value is 30 minutes. The security appliance will log
	the virus events between alert intervals and send them in an alert email to
	the specified email address.
	• Send to Email Address: Enter the email address to receive the alert
	emails.
	To enable Anti-Virus Alert, you must complete the following tasks:
	• Enable the Anti-Virus feature and specify the protocols to scan for viruses
	in the Security Services > Anti-Virus > General Settings page. See
	Configuring Anti-Virus, page 302.
	• Configure the email server settings used to send the alert emails.
	• Check Anti-Virus Alert in the Enable column, set the alert interval, and
	specify the email address used to receive the alert emails.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 413