Casio ISA550WBUN3K9 manual Configuring the Primary WAN, Configuring the Secondary WAN

Configuration Wizards	2
Using the Setup Wizard for the Initial Configuration

Configuring the Primary WAN

STEP 20 Use the Primary WAN Connection page to configure the primary WAN connection by using the account information provided by your ISP.

•WAN Name: The name of the primary WAN port.

•IP Address Assignment: Depending on the requirements of your ISP, choose the network addressing mode and configure the corresponding fields for the primary WAN port. The security appliance supports DHCP Client, Static IP, PPPoE, PPTP, and L2TP. For complete details, see Network Addressing Mode, page125.

STEP 21 After you are finished, click Next.

Configuring the Secondary WAN

STEP 22 If only one WAN port is configured, proceed to Configuring Default LAN Settings, page 43. If two WAN ports are configured, use the Secondary WAN Connection page to configure the secondary WAN connection by using the account information provided by your ISP.

•WAN Name: The name of the secondary WAN port.

•IP Address Assignment: Depending on the requirements of your ISP, choose the network addressing mode and configure the corresponding fields for the secondary WAN port. For complete details, see Network Addressing Mode, page125.

STEP 23 After you are finished, click Next.

Configuring WAN Redundancy

STEP 24 If you have two WAN links, use the WAN Redundancy page to determine how the two ISP links are used.

•Equal Load Balancing (Round Robin): Choose this option if you want to re-order the WAN ports for Round Robin selection. The order is as follows: WAN1 and WAN2. The Round Robin will then be back to WAN1 and continue the order.

•Weighted Load Balancing: Choose this option if you want to distribute the bandwidth to two WAN ports by the weighted percentage or by the weighted link bandwidth. The two links will carry data for the protocols that are bound to them.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 42