Casio ISA550WBUN3K9 manual Configuring WAN QoS Policy Profiles, Configuring WAN QoS Class Rules

Networking	4
Configuring Quality of Service

NOTE: Traffic that matches the above settings will be classified to a class for management purposes.

STEP 4 Click Save to apply your settings.

Configuring WAN QoS Policy Profiles

Use the QoS Policy Profile page to configure class-based policy profiles for managing traffic through the WAN interfaces.

NOTE Up to 32 WAN QoS policy profiles can be configured on the security appliance.

STEP 1 Click Networking > QoS > WAN QoS > QoS Policy Profile.

STEP 2 To add a new WAN QoS policy profile, click Add.

Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click the Delete (x) icon.

The QoS Policy - Add/Edit window opens.

STEP 3 Enter the following information:

•Policy Name: Enter the name for the WAN QoS policy profile.

•Apply this policy to: Click Inbound Traffic to apply this policy profile for inbound traffic, or click Outbound Traffic to apply this policy profile for outbound traffic.

STEP 4 Specify the QoS settings for the traffic classes that you want to associate with the policy profile. For complete details, see Configuring WAN QoS Class Rules, page 160.

STEP 5 Click OK to save your settings.

STEP 6 Click Save to apply your settings.

Configuring WAN QoS Class Rules

This section describes how to configure the QoS class rules that you want to associate with the WAN QoS policy profile.

NOTE Up to 64 traffic classes can be associated with one WAN QoS policy profile.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 160