Firewall
Firewall and NAT Rule Configuration Examples
Cisco ISA500 Series Integrated Security Appliances Administration Guide 277
6
STEP4 Or go to the Firewall > NAT > Advanced NAT page to create an advanced NAT rule
as follows.
STEP 5 Then go to the Firewall > Access Control > ACL Rules page to create a firewall rule
as follows to allow access:
NOTE When you create the port forwarding rule, you can check Create Firewall
Rule to automatically generate the firewall rule.
Solution 2: For this use case, you can use the DMZ Wizard to complete the
configuration.
From WAN1
To DMZ
Original Source
Address
ANY
Original Destination
Address
PublicIP
Original Services RDP
Translate d Source
Address
ANY
Translate d
Destination Address
RDPServer
Translated Services RDP
From Zone WAN
To Zo ne DMZ
Services RDP
Source Address ANY
Destination Address RDPServer
Match Action Pe rmit