Casio ISA550WBUN3K9 manual Configuring Schedules, Rebooting the Security Appliance

Device Management	10
Configuring Schedules

Rebooting the Security Appliance

To reboot the security appliance, you can press and release the RESET button on the back panel for less than 3 seconds, or perform the Reboot operation from the Configuration Utility.

STEP 1 Click Device Management > Reboot/Reset.

The Reboot/Reset window opens.

STEP 2 In the Reboot Device area, click Reboot.

A warning message appears saying “Preparing to reboot. Do you want to continue? WARNING: All current sessions will be closed and the system will be down for approximately 180 seconds.”

STEP 3 Click Yes to reboot the security appliance.

Configuring Schedules

The schedule specifies when the firewall rule or the application control policy is active. For example, if you want a firewall rule only to work on the weekend, you can create a schedule called “Weekend” that is only active on Saturday and Sunday.

STEP 1 Click Device Management > Schedules.

The Schedules window opens.

STEP 2 To create a new schedule, click Add.

Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click the Delete (x) icon. To delete multiple entries, check them and click Delete.

The Schedule - Add/Edit window opens.

STEP 3 Enter the following information:

•Schedule Name: Enter the name for the schedule.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 449