Casio ISA550WBUN3K9 manual Configuring Wireless Security

Configuration Wizards	2
Using the Wireless Wizard (for ISA550W and ISA570W only)

STEP 2 In the Security Settings area, specify the wireless security settings.

•Security Mode: Choose the security mode and configure the corresponding security settings. For security purposes, we strongly recommend that you use WPA2 for wireless security. For example, if you choose WPA2-Personal, enter the following information:

-Encryption: WPA2-Personal always uses AES for data encryption.

-Shared Secret: The Pre-shared Key (PSK) is the shared secret key for WPA. Enter a string of at least 8 characters to a maximum of 63 characters.

-Key Renewal Timeout: Enter a value to set the interval at which the key is refreshed for clients associated to this SSID. A value of zero (0) indicates that the key is not refreshed. The default is 3600 seconds.

NOTE: For information on configuring other security modes, see

Configuring Wireless Security, page 211.

STEP 3 In the Advanced Settings area, enter the following information:

•VLAN Mapping: Choose the VLAN to which the SSID is mapped. All traffic from the wireless clients that are connected to this SSID will be directed to the selected VLAN. For Intranet VLAN access, you must choose a VLAN that is mapped to a trusted zone.

•User Limit: Specify the maximum number of users that can simultaneously connect to this SSID. Enter a value in the range of 0 to 200. The default value is zero (0), which indicates that there is no limit for this SSID.

NOTE: The maximum number of users that can simultaneously connect to all enabled SSIDs is 200.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 79