Casio ISA550WBUN3K9 manual Configuring a Firewall Rule, Configuration Examples

Firewall	6
Configuring Firewall Rules to Control Inbound and Outbound Traffic

•Check Enable to enable a firewall rule, or uncheck this box to disable it. By default, all default firewall rules are enabled.

•To add a new entry, click the Add button.

•To edit an entry, click the Edit (pencil) icon.

•To delete an entry, click the Delete (x) icon.

•To delete multiple entries, check them and click the Delete button.

•Check Log to log the event when a firewall rule is hit. For information on configuring firewall logging settings, see Configuring Firewall Logging Settings, page 260.

•To permit traffic access, choose Permit. To deny traffic access, choose Deny. To increase the Hit Count number by one when the packet hits the firewall rule, choose Accounting.

•To view the type of a firewall rule, point your mouse cursor to the Detail icon.

•To set the values in the Hit Count column for all firewall rules to zero, click Reset.

•To manually refresh the data in the table, click Refresh.

NOTE: The default firewall rules cannot be disabled, deleted, edited, nor moved.

Configuring a Firewall Rule

This section describes how to configure a firewall rule to control inbound or outbound traffic.

NOTE For detailed firewall configuration examples, see Firewall and NAT Rule

Configuration Examples, page 274.

STEP 1 Click Firewall > Access Control > ACL Rules.

The ACL Rules window opens.

STEP 2 To add a new firewall rule, click Add.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 257