Device Management

10

 

Firmware Management

 

 

 

 

 

Firmware Auto Fall Back Mechanism

The security appliance includes two firmware images in the same NAND flash to provide an Auto Fall Back mechanism so that the security appliance can automatically switch to the secondary firmware when the primary firmware experiences a CRC error or cannot boot up successfully for five times.

CRC Error: An error that the firmware cannot pass the CRC (Cyclic Redundancy Check) validation. Downloading an incomplete firmware or incompletely writing the firmware to the flash may cause the CRC error.

Boot Failure: A failure that the firmware cannot boot up successfully for five times.

The Auto Fall Back mechanism operates as follows:

STEP 1 The security appliance first boots up with the primary firmware.

STEP 2 The bootloader checks the CRC for the primary firmware.

STEP 3 If the CRC error or the boot failure occurs for the primary firmware, the bootloader will switch to the secondary firmware.

STEP 4 The bootloader checks the CRC for the secondary firmware.

STEP 5 If the CRC error or the boot failure occurs for the secondary firmware, the Rescue mode starts up. In Rescue mode, the security appliance works as a TFTP server. You can use a TFTP client to upload the firmware image to upgrade the firmware. For more information about the Rescue mode, see Using Rescue Mode to Recover the System, page 438.

Using Rescue Mode to Recover the System

When the system has a booting problem, a device error occurs, or the system has a problem, the POWER/SYS light on the front panel is solid amber. Follow these steps to start up the Rescue mode directly and then recover the system.

STEP 1 Press and hold the RESET button on the back panel of the security appliance for more than 3 seconds and power the unit on simultaneously.

The Rescue mode starts up. The Status LED flashes green and then shines solid amber. In Rescue mode, the security appliance works as a TFTP server.

Cisco ISA500 Series Integrated Security Appliances Administration Guide

438

Page 438
Image 438
Casio ISA550WBUN3K9 manual Firmware Auto Fall Back Mechanism, Using Rescue Mode to Recover the System