Casio ISA550WBUN3K9 manual Configuring Radius Servers, Click Users Radius Servers

User Management	9
Configuring RADIUS Servers

STEP 3 Click Configure to configure the LDAP settings for user authentication. For complete details, see Using LDAP for User Authentication, page 398.

STEP 4 Click Save to apply your settings.

Configuring RADIUS Servers

Use the RADIUS Servers page to configure the RADIUS servers that are used to authenticate users who try to access the network resources. A RADIUS group includes a primary RADIUS server and a backup RADIUS server. The security appliance predefines three RADIUS groups.

STEP 1 Click Users > RADIUS Servers.

The RADIUS Servers window opens. All predefined RADIUS groups are listed in the table.

STEP 2 To edit the settings for a predefined RADIUS group, click the Edit (pencil) icon.

The RADIUS Group - Edit window opens.

STEP 3 Enter the following information:

•Primary RADIUS Server IP: Enter the IP address of the primary RADIUS server.

•Primary RADIUS Server Port: Enter the port number on the primary RADIUS server that is used to send the RADIUS traffic. The default is 1812.

•Primary RADIUS Server Pre-shared Key: Enter the pre-shared key that is configured on the primary RADIUS server.

•Secondary RADIUS Server IP: Enter the IP address of the secondary RADIUS server.

•Secondary RADIUS Server Port: Enter the port number on the secondary RADIUS server that is used to send the RADIUS traffic. The default is 1812.

•Secondary RADIUS Server Pre-shared Key: Enter the pre-shared key that is configured on the secondary RADIUS server.

STEP 4 Click OK to save your settings.

STEP 5 Repeat the above steps to edit the settings for other RADIUS groups if needed.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 401