Configuration Wizards

2

 

Using the Setup Wizard for the Initial Configuration

 

 

 

 

 

Configuring Remote Administration

STEP 16 Use the Remote Administration page to configure the remote management settings. The security appliance allows remote management securely by using HTTPS and HTTP, for example https://xxx.xxx.xxx.xxx:8080.

Remote Administration: Click On to enable remote management by using HTTPS, or click Off to disable it. We recommend that you use HTTPS for secure remote management.

HTTPS Listen Port Number: If you enable remote management by using HTTPS, enter the port number. By default, the listen port number for HTTPS is 8080.

HTTP Enable: Click On to enable remote management by using HTTP, or click Off to disable it.

HTTP Listen Port Number: If you enable remote management by using HTTP, enter the port number. By default, the listen port number for HTTP is 80.

Allow Address: To specify the devices that can access the configuration utility through the WAN interface, choose an Address Object or enter an address.

-Address Objects: These objects represent known IP addresses and address ranges, such as the GUEST VLAN and the DHCP pool. After completing the wizard, you can view information about Address Objects on the Networking > Address Management page.

-Create new address: Choose this option to enter an IP address or address range. In the pop-up window, enter a Name and specify the Type (Host or Range). For a single host, enter the IP address. For a range, enter the Starting IP Address and the Ending IP Address.

Remote SNMP: Click On to enable SNMP for remote connection, or click Off to disable SNMP. Enabling SNMP allows remote users to use the SNMP protocol to access the Configuration Utility.

STEP 17 After you are finished, click Next.

Cisco ISA500 Series Integrated Security Appliances Administration Guide

40

Page 40
Image 40
Casio ISA550WBUN3K9 manual Configuring Remote Administration