Casio ISA550WBUN3K9 manual Configuring Snmp, Click Device Management Administration Snmp

Device Management	10
Administration

Configuring SNMP

Simple Network Management Protocol (SNMP) is a network protocol used over User Datagram Protocol (UDP) that lets you monitor and manage the security appliance from a SNMP manager. SNMP provides a remote means to monitor and control the network devices, and to manage the configuration, statistics collection, performance, and security.

STEP 1 Click Device Management > Administration > SNMP.

STEP 2 Click On to enable SNMP, or click Off to disable SNMP. By default, SNMP is disabled.

STEP 3 If you enable SNMP, specify the SNMP version. The security appliance provides support for network monitoring using SNMP Versions 1, 2c, and 3. By default, SNMP Version 1 and 2 is selected.

STEP 4 After you enable SNMP and select the SNMP version, enter the following information:

•System Contact: Enter the name of the contact person for your security appliance.

•Device: Enter the device name for easy identification of your security appliance.

•System Location: Enter the physical location of your security appliance.

•Security User Name: Enter the name of the administrator account with the ability to access and manage the SNMP MIB objects. This is only available for SNMPv3.

•Authentication Password: Enter the password of the administrator account for authentication (the minimum length of password is 8 characters). This is only available for SNMPv3.

•Encrypted Password: Enter the password for data encryption (the minimum length of password is 8 characters). This is only available for SNMPv3.

•SNMP Engine ID: The engine ID of the SNMP entity. The engine ID is used as a unique identification between two SNMP entities. This is only available for SNMPv3.

STEP 5 To enable SNMP Trap, enter the following information:

•SNMP Read-Only Community: Enter the read-only community used to access the SNMP entity.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 415