Casio ISA550WBUN3K9 manual Vpn

VPN	8
Configuring SSL VPN

•Address: If you choose Bypass-Local or Auto, enter the IP address or domain name of the MSIE proxy server.

•Port: Enter the port number of the MSIE proxy server.

•IE Proxy Exception: You can specify the exception hosts for IE proxy settings. This option allows the browser not to send traffic for the given hostname or IP address through the proxy. To add an entry, enter the IP address or domain name of an exception host and click Add. To delete an entry, select it and click Delete.

STEP 5 In the Split Tunneling Settings area, enter the following information:

Split tunneling permits specific traffic to be carried outside of the SSL VPN tunnel. Traffic is either included (resolved in tunnel) or excluded (resolved through the ISP or WAN connection). Tunnel resolution configuration is mutually exclusive. An IP address cannot be both included and excluded at the same time.

•Enable Split Tunneling: By default, all traffic from the host is directed through the VPN tunnel. Check this box to enable the split tunneling feature so that the VPN tunnel is used only for traffic that is specified by the client routes.

•Split Selection: Choose one of the following options:

-Include Traffic: Allows you to add the client routes on the SSL VPN client so that only traffic to the destination networks can be redirected through the VPN tunnel. To add a client route, enter the destination subnet to which a route is added on the SSL VPN client in the Address field and the subnet mask for the destination network in the Netmask field, and then click Add.

-Exclude Traffic: Allows you to exclude the destination networks on the SSL VPN client. Traffic to the destination networks is redirected using the SSL VPN client’s native network interface (resolved through the ISP or WAN connection). To add a destination subnet, enter the destination subnet to which a route is excluded on the SSL VPN client in the Address field and the subnet mask for the excluded destination in the Netmask field, and then click Add.

NOTE: To exclude the destination networks, make sure that the Exclude Local LAN feature is enabled on the Cisco AnyConnect Secure Mobility clients.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 380