Casio ISA550WBUN3K9 Configuring Wireless Rogue AP Detection, Click Wireless Rogue AP Detection

Wireless (for ISA550W and ISA570W only)	5
Configuring Wireless Rogue AP Detection

Cisco Small Business Home

www.cisco.com/smb

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their

respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

© 2013 Cisco Systems, Inc. All rights reserved.

78-21182-01

Configuring Wireless Rogue AP Detection

A Rogue AP is an access point connected to your network without authorization. It is not under the management of your network administrators and does not necessarily conform to your network security policies.

The security appliance provides proactive Rogue AP Detection in the 2.4-GHz band. Rogue AP Detection is able to discover, detect, and report unauthorized access points. You can specify an authorized access point by its MAC address.

STEP 1 Click Wireless > Rogue AP Detection.

The Rogue AP Detection window opens.

STEP 2 Click On to enable Rogue AP Detection, or click Off to disable it.

STEP 3 If you enable Rogue AP Detection, all rogue access points detected by the security appliance in the vicinity of the network appear in the list of Detected Rogue Access Points. The MAC address of the detected access point is displayed. You can locate the rogue access points by their MAC addresses and monitor them until they are eliminated or authorized. Click Refresh to update the data.

STEP 4 If an access point listed as a rogue is actually a legitimate access point, you can click Grant Access to set it as an authorized access point. The granted access point is moved to the list of Authorized Access Points.

STEP 5 The security appliance will not detect the authorized access points.

•To add an authorized access point, click Add. Enter the MAC address of the access point and click OK. You can specify up to 128 authorized access points.

•To delete an authorized access point from the list, click the Delete (x) icon.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 247