Casio ISA550WBUN3K9 Viewing Network Status, Configuring IPv4 or IPv6 Routing, Managing Ports

Networking	4
Viewing Network Status

Viewing Network Status

Use the Networking > Network Status pages to view the traffic statistics, the usage reports, the WAN bandwidth reports, all ARP (Address Resolution Protocol) entries, and DHCP address assignment. For descriptions of these status reports, see Network Status, page 88.

Configuring IPv4 or IPv6 Routing

Use the Networking > IPv4 or IPv6 Routing page to choose the IP routing mode for your network. Internet Protocol Version 6 (IPv6) is a new IP protocol designed to replace IPv4, the Internet protocol that is predominantly deployed and extensively used throughout the world. IPv6 quadruples the number of network address bits from 32 bits (in IPv4) to 128 bits, resulting in an exponentially larger address space. You can configure the security appliance to support IPv6 addressing on the WAN, LAN, and DMZ.

!

CAUTION In the current firmware, IPv6 functionalities are limited. ISA500 does not support firewall, VPN, and other security services for IPv6 in this firmware. We recommend enabling IPv6 for lab testing only with this firmware. Please check future firmware and release notes for information about any IPv6 updates.

STEP 1 Click IPv4 or IPv6 to enable both IPv4 and IPv6 addressing, or click IPv4 only to enable only IPv4 addressing. By default, only IPv4 addressing is supported.

STEP 2 Click Save to save your settings.

Managing Ports

Use the Networking > Ports pages to configure the physical ports, port mirroring, and port-based access control settings. Refer to the following topics:

•Viewing Status of Physical Interfaces, page 117

•Configuring Physical Ports, page 118

Cisco ISA500 Series Integrated Security Appliances Administration Guide 116