Casio ISA550WBUN3K9 manual Severity Level Description, Emergency level, Critical level

Device Management	10
Log Management

•To Email Address: The email address used to receive the logs.

•SMTP Server: The IP address or Internet name of the SMTP server.

•SMTP Authentication: Shows if the SMTP authentication is enabled or disabled.

NOTE: The above email server settings are read only. You must enable the Syslog Email feature and configure the email server settings to send the syslog messages to a specified email address. You can click the Set Email Alert link or go to the Device Management > Administration > Email Alert page to do this. See Configuring Email Alert Settings, page 408.

•Mail Subtitle: Enter the subtitle that is displayed in the email. For example, if you set the device name as the subtitle, the email recipient can recognize quickly what device the logs or alerts are coming from.

•Severity: Choose the severity level for the logs that you want to send.

Severity Level	Description
Emergency (level 0,	System unusable.
highest severity)
Alert (level 1)	Immediate action needed.
Critical (level 2)	Critical conditions.
Error (level 3)	Error conditions.
Warning (level 4)	Warning conditions.
Notification (level 5)	Normal but significant conditions.
Information (level 6)	Informational messages only.
Debug (level 7, lowest	Debugging messages.
severity)

For example: If you select Critical, all logs listed under the Critical,

Emergency, and Alert categories are sent.

STEP 5 In the Email Schedule area, specify the schedule to send the logs.

•Frequency: Choose the period of time that you want to send the logs.

- Hourly: Send the logs on an hourly basis.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 445