Casio ISA550WBUN3K9 Enabling IPsec Remote Access, Configuring IPsec Remote Access Group Policies

VPN	8
Configuring IPsec Remote Access

NOTE You must log in and possess a valid service contract in order to access the Cisco VPN Client software. A 3-year Cisco Small Business Support Service Contract (CON-SBS-SVC2) is required to download the client software from Cisco.com. If you don’t have one, contact your partner or reseller, or Cisco Support for more information.

For more information about how to download, install, and configure the Cisco VPN Client software, see this web page: http://www.cisco.com/en/US/products/sw/secursw/ps2308/index.html

Enabling IPsec Remote Access

STEP 1 Click VPN > IPsec Remote Access.

STEP 2 Click On to enable the IPsec Remote Access feature and hence set the security appliance as an IPsec VPN server, or click Off to disable it.

NOTE: Enabling the IPsec Remote Access feature will disable the Teleworker VPN Client feature.

STEP 3 Click Save to apply your settings.

Configuring IPsec Remote Access Group Policies

An IPsec Remote Access group policy is used by remote VPN clients to establish the VPN connections.

NOTE Up to 16 IPsec Remote Access group policies can be configured on the security appliance.

STEP 1 Click VPN > IPsec Remote Access.

STEP 2 To add an IPsec Remote Access group policy, click Add.

Other Options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click the Delete (x) icon. To delete multiple entries, check them and click Delete.

The IPsec Remote Access - Add/Edit window opens.

STEP 3 In the Basic Settings tab, enter the following information:

•Group Name: Enter the name for the group policy.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 357