Casio ISA550WBUN3K9 manual Configuring SSL VPN

VPN	8
Configuring SSL VPN

•If you want to immediately activate the connection after the settings are saved, click the Activate Connection button. When you create multiple Teleworker VPN Client group policies at a time, only one connection can be active after you save your settings. The security appliance will use the group policy that was last created or edited to initiate the VPN connection.

•If you only want to create the Teleworker VPN client group policy and do not want to immediately activate the connection after the settings are saved, click the Do Not Activate button. You can click the Connect icon to manually establish the VPN connection.

NOTE: This feature is different from the Active Connection on Startup feature. It is used to activate the connection immediately after the settings are saved, but the Activate Connection on Startup feature is used to activate the connection when the security appliance starts up.

STEP 8 Click Save to apply your settings.

Configuring SSL VPN

SSL VPN is a flexible and secure way to extend network resources to virtually any remote user. The security appliance supports the SSL VPN feature, and interoperates with the Cisco AnyConnect Secure Mobility Client software.

A valid security license is required to support SSLVPN with mobile devices such as smart phones and tablets. For more information, see Activating Security Services, page 293.

Figure 9 shows an example of SSL VPN. Users can remotely access the network by using the Cisco AnyConnect Secure Mobility Client software. When the SSL VPN tunnel is established, each user will have an IP address on the internal network.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 372