Casio ISA550WBUN3K9 manual Performing Basic Configuration Tasks, Parameter Default Value

Getting Started	1
Performing Basic Configuration Tasks

green. Release the button and wait for the unit to reboot. The POWER/SYS light will flash green when the system is rebooting.

•Or launch the Configuration Utility and login. Click Device Management > Reboot/Reset in the left hand navigation pane. In the Reset Device area, click Reset to Factory Defaults.

After a restore to factory defaults, the following settings apply:

Parameter	Default Value
Username	cisco
Password	cisco
LAN IP	192.168.75.1
DHCP Range	192.168.75.100 to 200

Performing Basic Configuration Tasks

We recommend that you complete the following tasks before you configure the security appliance:

•Changing the Default Administrator Password, page 32

•Upgrading your Firmware After your First Login, page 33

•Backing Up Your Configuration, page 34

Changing the Default Administrator Password

The default administrator account (“cisco”) has full privilege to set the configuration and read the system status. For security purposes, you must change the default administrator password at the first login.

STEP 1 Enter the following information:

•User name: Enter the current username or enter a new username if you want to change the default username.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 32