Casio ISA550WBUN3K9 manual Mapping WAN QoS Policy Profiles to WAN Interfaces

Networking	4
Configuring Quality of Service

STEP 1 In the QoS Class Rules area, click Add to add a WAN QoS class rule.

The QoS Class Rule - Add/Edit window opens.

STEP 2 Enter the following information:

•Class: Choose an existing traffic selector (traffic class) to associate with the policy profile.

•Queue: For an outbound traffic policy profile, choose the queue for sending the packets that belongs to the selected traffic class. This option will be disabled for an inbound traffic policy profile.

•DSCP Marking: Choose the DSCP remarking value to assign the priority for traffic. For more information, see Understanding DSCP Values, page 171.

•CoS Marking: For an inbound traffic policy profile, choose the CoS remarking value to assign the priority for inbound traffic. This option will be disabled for an outbound traffic policy profile.

•Rate-limiting:Enter the amount of bandwidth limitation in Kbps for the selected traffic class. For example, if the policy profile is applied to inbound traffic, the rate-limiting setting only applies to incoming traffic that belongs to the selected class. The default value is 0 Kbps, which indicates that there is no limit.

STEP 3 Click OK to save your settings.

Mapping WAN QoS Policy Profiles to WAN Interfaces

Use the Policy Profile to Interface Mapping page to apply the WAN QoS policy profiles on the WAN interfaces.

STEP 1 Click Networking > QoS > WAN QoS > Policy Profile to Interface Mapping.

The Policy Profile to Interface Mapping window opens.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 161