Casio ISA550WBUN3K9 manual Wireless for ISA550W and ISA570W only

Wireless (for ISA550W and ISA570W only)	5
Configuring SSID Profiles

-Secondary RADIUS Server Shared Secret: The shared secret key of the secondary RADIUS server.

NOTE: You can change the settings in the above fields but the RADIUS server settings you specify will replace the default settings of the selected group. To maintain the RADIUS servers, go to the Users > RADIUS Servers page. See Configuring RADIUS Servers, page 401.

STEP 10 If you choose WPA2-Enterpriseas the security mode, enter the following information:

•Encryption: Always use AES encryption algorithm for data encryption.

•Key Renewal Timeout: Enter a value to set the interval at which the key is refreshed for clients associated to this SSID. The valid range is 0 to 4194303 seconds. A value of zero (0) indicates that the key is not refreshed. The default value is 3600 seconds.

•RADIUS Server ID: Choose an existing RADIUS group for client authentication. The RADIUS server settings of the selected group are displayed. You can change the RADIUS server settings but the settings you specify will replace the default settings of the selected group. To maintain the RADIUS servers, go to the Users > RADIUS Servers page. See Configuring RADIUS Servers, page 401.

STEP 11 If you choose WPA/WPA2-Enterprise Mixed as the security mode, enter the following information:

•Encryption: Automatically choose TKIP or AES encryption algorithm for data encryption.

•Key Renewal Timeout: Enter a value to set the interval at which the key is refreshed for clients associated to this SSID. The valid range is 0 to 4194303 seconds. A value of zero (0) indicates that the key is not refreshed. The default value is 3600 seconds.

•RADIUS Server ID: Choose an existing RADIUS group for client authentication. The RADIUS server settings of the selected group are displayed. You can change the RADIUS server settings but the settings you specify will replace the default settings of the selected group. To maintain the RADIUS servers, go to the Users > RADIUS Servers page. See Configuring RADIUS Servers, page 401.

STEP 12 If you choose RADIUS as the security mode, choose an existing RADIUS group for client authentication from the RADIUS Server ID drop-down list. The RADIUS server settings of the selected group are displayed. You can change the RADIUS server settings but the settings you specify will replace the default settings of the

Cisco ISA500 Series Integrated Security Appliances Administration Guide 216