Casio ISA550WBUN3K9 manual Configuring Wireless Radio Settings, Wan Ip

Configuration Wizards	2
Using the Setup Wizard for the Initial Configuration

For example, you host an RDP server (192.168.12.101) on the DMZ. Your ISP has provided a static IP address (172.39.202.102) that you want to expose to the public as your RDP server address. You can create a DMZ service as follows to allow Internet user to access the RDP server by using the specified public IP address.

Original Service	RDP
Translated Service	RDP
Translated IP	RDPServer
WAN	WAN1
WAN IP	PublicIP
Enable DMZ Service	On
Create Firewall Rule	On

NOTE: In this example, you must manually create two address objects (RDPServer and PublicIP) and a TCP service object with the port 3389 called “RDP.”

STEP 35 Click OK to save your settings.

STEP 36 After you are finished, click Next.

Configuring Wireless Radio Settings

STEP 37 If you are using the ISA550 or ISA570, proceed to Viewing Configuration Summary, page 50. If you are using the ISA550W or ISA570W, use the Wireless Radio Setting page to configure the wireless radio settings.

•Wireless Radio: Click On to turn wireless radio on and hence enable the SSID called “cisco-data,” or click Off to turn wireless radio off.

•Wireless Network Mode: Choose the 802.11 modulation technique.

-802.11b/g mixed: Choose this mode if some devices in the wireless network use 802.11b and others use 802.11g. Both 802.11b and 802.11g clients can connect to the access point.

-802.11g/n mixed: Choose this mode if some devices in the wireless network use 802.11g and others use 802.11n Both 802.11g and 802.11n clients can connect to the access point.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 47