Casio ISA550WBUN3K9 manual Configuring Cisco OnPlus

Device Management	10
Configuring Cisco Services and Support Settings

Configuring Cisco OnPlus

Use the Cisco OnPlus page to enable or disable Cisco OnPlus Advanced Security Service on the security appliance. Enabling Cisco OnPlus Advanced Security Service allows your security appliance to send security reporting and notification data through the OnPlus Service. If an OnPlus appliance is not present in your network, this setting will have no effect.

For example, you can back up and restore the configuration, upgrade the firmware, and view the network usage reports, WAN bandwidth reports, and device utilization of the security appliance through the OnPlus Service. The security appliance can initiate or accept HTTP or HTTPS connection with the agent.

To learn more information about Cisco OnPlus, go to www.cisco.com/go/onplus.

STEP 1 Click Device Management > Cisco Services & Support > Cisco OnPlus.

STEP 2 Check the box next to Enable Cisco OnPlus Advanced Security Service to enable Cisco OnPlus on your security appliance, or uncheck this box to disable it. By default, Cisco OnPlus is enabled. This setting is provided mainly for support and troubleshooting purposes. If you disable Cisco OnPlus on the security appliance, Cisco OnPlus Service will be unable to communicate with the security appliance and overall management, monitoring, and reporting will be impacted.

NOTE: The security appliance only starts collecting the session data when the

OnPlus appliance is connected.

STEP 3 If Cisco OnPlus is enabled, we recommend that you enable the following discovery protocols on your security appliance for optimal device discovery and topology support via the OnPlus portal:

•Cisco Discovery Protocol (CDP): Shows if CDP is enabled or disabled. You can click the link to view or edit its settings. See CDP Discovery, page 432.

•Bonjour Discovery Protocol: Shows if Bonjour is enabled or disabled. You can click the link to view or edit its settings. See Bonjour Discovery, page 432.

STEP 4 Click Save to apply your settings.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 425