How to use the administration screen
Downloading the connection software
The procedure for downloading the software is the same as Step 1 to 5 in "F. Installing the connection software". See page 22.
Selecting the image to be projected
When connecting the projector to multiple computers wirelessly, one administrator can select the image to be projected from the computers.
•Approximately 30 computers can be connected to the projector wirelessly at the same time. However, the number of connectable computers depends on the radio wave environment.
1.Run the Web browser.
•The administration screen is displayed.
•If the screen is not displayed, access "http://(the IP address of the projector)". The IP address of the projector is a numeric value displayed in "Server IP:" in the projected image.
•You can also display the administration screen by selecting "Web Admin" in the menu of the connection software. See page 24.
2.Click "Conference Control".
Selecting a language
You can select the language to be displayed in the administration screen between "English" and "Japanese".
1.Run the Web browser.
•If the screen is not displayed, access "http://(the IP address of the projector)". The IP address of the projector is a numeric value displayed in "Server IP:" in the projected image.
•Once the browser is closed, the setting is reset to the default as it is not to be saved.
2.Click the
3.Enter a password, then click [Login].
•The list of the computers which are wirelessly connected to this projector is displayed.
•If "chairman" is specified for the user ID, the default password is "chairman".
•You can change the password. See page 28.
4.Click "OK".
5.Click the 
icon for the computer of which you want to display the image.
Configuring the projector
As well as changing the password, you can specify the settings for the network and the projection by logging on the system administrator screen.
1.Run the Web browser.
2.Click "Admin".
3.Enter a password, then click [Login].
•If "admin" is specified for the user ID, the default password is "admin".
•You can change the password. See page 28.
Checking the status of the projector
You can check the model name, version, network status, and connec- tion status of the projector.
1.Click "System Status".
•The icon in Play Control turns into 
, and then the image is switched to that of the selected computer.
•While selecting the image to be projected in this screen, users other than the administrator cannot stop or start the projection using the connection software.
•When multiple users have logged on this screen, the only user who logged on first can operate. Users who logged on later cannot switch the image to be projected.
6.Click [Logout] after completing the operation.
