How to use the connection software
For details on the procedure for running the connection software, see page 22.
Authentication code
Reception status (three levels)
Pausing or resuming the projection
Pausing the projection
1.Click the 
button.
Resuming the projection
1.Click the 
button.
Updating the paused projection
You can update the paused image to the one displayed on the com- puter screen currently.
1.Click the 
button while pausing images.
• Projected images are updated each time you click the button.
Stopping or starting the projection
Stopping the projection
1.Click the 
button.
•Projecting the image on the computer screen stops, and the default screen of the projector appears.
Starting the projection
1.Click the 
button.
Exiting the connection software
1.Click the 
icon, then select [Exit].
Important
•When multiple users have logged on the screen, users who logged on later are prioritized.
•Approximately 30 computers can be connected to the projector wirelessly at the same time. However, the number of connectable computers depends on the radio wave environment.
•If you want to connect to another projector, select the desired one in Step 6 in "E. Connecting wirelessly" on p. 21.
Other operation
Displaying the administration screen
1.Click the 
icon, then select [Web Admin].
• For details on the administration screen, see page 26.
Reconnecting to the projector
If the wireless connection to the projector is lost due to problems such as poor reception, you can reconnect to the projector.
•Set the input source of the projector to be switched to "WIRE- LESS" in advance. (For more details, see page 21.)
1.Click the 
icon, then select [Search Server].
2.Enter the login code, then click the [OK] button.
•The login code is a
Installing the connection software on a USB flash drive
If the connection software is installed on a USB flash drive in advance, you can use the connection software immediately on a computer equipped with USB ports. You do not need to install the connection software on the computer.
•When the connection software is installed on a USB flash drive, the volume name of the USB flash drive changes to "PnS Token".
1.Insert the USB flash drive into a USB port of the computer on which the connection software is running.
2.Click the 
icon, then select [Make PnS Token].
3.Click the [Next>] button.
