VPN

8

 

Configuring VPN Passthrough

 

 

 

 

 

Configuring VPN Passthrough

Use the VPN Passthrough page to configure VPN Passthrough to allow VPN traffic that originates from VPN clients to pass through your security appliance. Use this feature if there are devices behind your security appliance that need the IPSec tunnels to be set up independently, such as connecting to another router on the WAN.

STEP 1 Click VPN > VPN Passthrough.

The VPN Passthrough window opens.

STEP 2 Specify the type of traffic that can pass through the security appliance:

Layer-2 Tunneling Protocol (L2TP): Click On to allow L2TP tunnels to pass through the security appliance, or click Off to disable it.

Point-to-Point Tunneling Protocol (PPTP): Click On to allow PPTP tunnels to pass through the security appliance, or click Off to disable it.

Internet Protocol Security (IPsec): Click On to allow IP security tunnels to pass through the security appliance, or click Off to disable it.

STEP 3 Click Save to apply your settings.

Cisco ISA500 Series Integrated Security Appliances Administration Guide

387

Page 387
Image 387
Casio ISA550WBUN3K9 manual Configuring VPN Passthrough, Click VPN VPN Passthrough