Casio ISA550WBUN3K9 manual Configuring Wireless Security, Security Mode Description, Open

Wireless (for ISA550W and ISA570W only)	5
Configuring SSID Profiles

Configuring Wireless Security

This section describes how to configure the security mode for the SSID. All devices on this network must use the same security mode and settings to work correctly. Cisco recommends using the highest level of security that is supported by the devices in your network.

NOTE If the security mode is set as WEP or as WPA with TKIP encryption algorithm for the SSID that supports 802.11n, the transmit rate for its associated client stations will not exceed 54 Mbps.

STEP 1 Click Wireless > Basic Settings.

STEP 2 In the SSIDs area, click the Edit (pencil) icon to edit the settings for the SSID.

The SSID - Edit window opens.

STEP 3 In the Security Mode tab, specify the following information:

•SSID Name: The name of the SSID on which the security settings are applied.

•User Limit: Specify the maximum number of users that can simultaneously connect to this SSID. Enter a value in the range 0 to 200. The value of zero (0) indicates that there is no limit for this SSID.

NOTE: The maximum number of users that can simultaneously connect to all enabled SSIDs is 200.

•Security Mode: Choose the type of security.

Security Mode	Description
Open	Any wireless device that is in range can connect to the
	SSID. This is the default setting but not recommended.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 211