Casio ISA550WBUN3K9 manual Local Radius Server Settings Database

User Management	9
Configuring User Authentication Settings

User1 in	Group1	Group2	Default Group
Group1
User1 in	Group1	Group2	Default Group
Group2
User1 does not	Group1	Group2	Default Group
exist

In the above table, if the User1 in the RADIUS server belongs to the Group1 but the User1 in the local database belongs to the Group2, then the User1 will belong to the Group1 after the user passes the RADIUS authentication. If the User1 in the RADIUS server belongs to the Group3 but the local database has not the Group3, then the User1 will be set to the specified default group.

-Local Configuration Only: Find the user group information from the local database only.

For example, the RADIUS server has three user groups (Group1, Group2, and Group3) and the local database has two user groups (Group1 and Group2). The following table displays the user group membership settings.

Local	RADIUS Server Settings
Database
	User1 in	User1 in	User1 in
Settings
	Group1	Group2	Group3
User1 in	Group1	Group1	Group1
Group1
User1 in	Group2	Group2	Group2
Group2
User1 does not	Default Group	Default Group	Default Group
exist

In the above table, if the User1 in the RADIUS server belongs to the Group1 but the User1 in the local database belongs to the Group2, then the User1 will belong to the Group2 after the user passes the RADIUS authentication. If the User1 does not exist in the local database, it will be set to the specified default group.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 396