Casio ISA550WBUN3K9 manual Wan

Configuration Wizards	2
Using the DMZ Wizard to Configure DMZ Settings

•WAN IP: Specify the public IP address for the server. You can use the IP address of the selected WAN port or a public IP address that is provided by your ISP. When you choose Both as the incoming WAN port, this option is grayed out.

•Enable DMZ Service: Click On to enable the DMZ service, or click Off to create only the DMZ service.

•Create Firewall Rule: Check this box to automatically create a firewall rule to allow access for this DMZ service. You must manually create a firewall rule if you uncheck this box.

NOTE: If you choose Both as the incoming WAN port, a firewall rule from Any zone to Any zone will be created accordingly.

•Description: Enter the name for the DMZ service.

For example, you host an RDP server (192.168.12.101) on the DMZ. Your ISP has provided a static IP address (172.39.202.102) that you want to expose to the public as your RDP server address. You can create a DMZ service as follows to allow Internet user to access the RDP server by using the specified public IP address.

Original Service	RDP
Translated Service	RDP
Translated IP	RDPServer
WAN	WAN1
WAN IP	PublicIP
Enable DMZ Service	On
Create Firewall Rule	On

NOTE: In the above example, you must manually create two address objects (RDPServer and PublicIP) and a TCP service object with the port 3389 called “RDP.”

STEP 18 Click OK to save your settings.

STEP 19 After you are finished, click Next.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 75