Casio ISA550WBUN3K9 manual Bonjour Discovery, CDP Discovery

Device Management	10
Device Discovery Protocols

Bonjour Discovery

Bonjour is a service advertisement and discovery protocol. Bonjour only advertises the default services configured on the security appliance when Bonjour is enabled.

STEP 1 Click Device Management > Discovery Protocols > Bonjour.

STEP 2 Click On to enable Bonjour, or click Off to disable it. If you enable Bonjour, all default services such as CSCO-SB, HTTP, and HTTPS are enabled. You cannot disable a particular service. You can either enable Bonjour or disable it.

STEP 3 In the VLAN Association area, you can associate the VLANs for the default services. The default services will only be visible to the hosts that belong to the associated VLANs. By default, DEFAULT VLAN is the broadcasting domain.

•To associate a VLAN, choose a VLAN from the VLAN drop-down list and click Apply.

•To dissociate the VLANs from the default services, check the boxes next to the appropriate VLANs and click Delete.

STEP 4 Click Save to apply your settings.

CDP Discovery

Cisco Discovery Protocol (CDP) is a device discovery protocol that runs on all Cisco manufactured equipment. Each CDP enabled device sends periodic messages to a multicast address and also listens to the periodic messages sent by others in order to learn about neighboring devices and determine the status of these devices. See CDP Discovery, page 432.

STEP 1 Click Device Management > Discovery Protocols > CDP.

STEP 2 In the CDP Configuration area, enter the following information:

•Cisco Discovery Protocol (CDP): Control whether CDP will run on some, all, or none of Ethernet interfaces. Choose one of the following options:

-Enable All: Enable CDP on all ports supported by the security appliance.

-Disable All: Disable CDP on all ports.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 432