Casio ISA550WBUN3K9 manual Example https//209.165.201.18080

Device Management	10
Administration

•Web Server SSL Certificate: Choose a certificate to authenticate users who try to access the Configuration Utility through a web browser by using HTTPS. By default, the web authentication server uses the default certificate for authentication. You can choose an imported certificate for authentication. The web authentication server will restart to load the selected certificate.

•Management: Check the box to enable access the configuration utility via HTTP or HTTPS. HTTP is enabled by default.

NOTE: Unchecking both boxes will disable access to the configuration utility.

•Allow Address: Choose whether to allow access to the configuration utility from Any IP address or from a particular address or address range. The default setting is Any.

STEP 4 Click Save to apply your settings.

Configuring Remote Administration

You can enable Remote Administration to allow an administrator to connect to the configuration utility from a different network than the local network (LAN) of the security appliance. You can allow connections through HTTPS (HTTP over SSL) and HTTP.

When this feature is enabled, a user can access the configuration utility by launching a web browser and entering the protocol, the WAN IP address of the security appliance, and the specified Listen Port Number, as shown in this

example: https://209.165.201.1:8080

NOTE To locally or remotely access the Configuration Utility from a PC running Windows Server 2008 and Internet Explorer 9 by using the HTTP protocol, add the URL (such as http://192.168.75.1:80/login.htm) as a trusted site. To add a trusted site in Internet Explorer 9, you can first open the browser and go to the Tools > Internet Options > Security page, and then select the Trusted sites zone and add your URL as a trusted site.

STEP 1 Click Device Management > Administration > Remote Administration. STEP 2 Specify the following information:

•Remote Administration: Click On to enable remote management by using HTTPS, or click Off to disable it. We recommend that you use HTTPS for secure remote management.

Cisco ISA500 Series Integrated Security Appliances Administration Guide 407