Seiko Group IP-6600 manual When an Error Message Appears, Service Call Errors, POC error

When an Error Message Appears

If the ERROR lamp lights, check the message to be displayed on the LCD.

There are four types of error messages.

- Service call errors:

Operator unrecoverable errors, such as H/W, S/W failure.

Contact our service centers.

-Communication errors:

Communication protocol errors.

Take appropriate measures according to the error code or message.

-Operator call errors:

The operator can correct these errors.

Take appropriate measures according to the message.

The error messages are as follows. Take appropriate measure according to the error message.

	If a communication error or a data error occurs, the ERROR
HINT	lamp does not light. An error message appears on the LCD
	and disappears when the next operation is performed.

Service Call Errors

HINT

<POC error>

If any of the following service call error messages appears, turn

the power switch off and then on again. This may release the

error.

INITIALIZING

nnnn: Error code

E E n n n n

Description : An unrecoverable error has occurred in the engine section. (This error message appears when an error is detected during self-diagnosis after the power is turned on.)

Measure : Contact your dealer or our service centers (The error code identified on the LCD is needed) .

5-4