Seiko Group IP-6600 manual Installing Paper on Winder

Installing Paper on Winder

A paper winder unit is built in the printer. It winds roll paper for

	storage without cutting it.
	Use the paper winder unit as follows:
1	Prepare the paper tube and 1 m-lead paper of which
	paper width is the same as the paper’s you will use.
	Attach the lead paper on the paper tube.

Tape

Basic Operations

Approx. 1 m

Paper tube

Section 2

Lead paper

NOTE

-Pay attention to the direction of attaching tape on the winding side according to the winding direction setting (outer side rewind/inner side rewind).

-Attach the paper to the take out roller straightly to protect slanting feed.

2 Insert the paper tube with the lead paper to the left

flange.

Left flange	Paper tube
Left flange

Tension roller

Paper tube

2-35