Menu Operations

(12)Wind value setting for FAN (VACUUM)

Sets wind value for FAN.

#VACUUM

>01 : NORMAL

<Parameter (Enter a choice)>

-NORMAL: Absorbs the paper at the normal wind value.

- LOW:

Absorbs the paper at the low wind value.

(13) Wait of heating setting (WAIT HEATER)

Sets whether print should wait for time that the heater temperature reaches the preset temperature.

#WAIT HEATER >01 : WAIT

<Parameter (Enter a choice)>

-

WAIT:

Waits the time until the heater temperature reaches

 

 

the preset temperature.

-

SKIP:

Starts printing even if the heater temperature does

 

 

not reach the preset temperature.

(14)Initial temperature setting for the front heater (FRONT HEATER)

Sets the front heater temperature.

(Celsius)

(Fahrenheiht)

#FRONT HEATER

#FRONT HEATER

>01 : 30C

>01 : 086F

<Parameter (Enter a value)>

- Range:

15 °C to 55 °C

(The heater will be OFF when "**" is set.)

Section 3 Operation Panel Menu Operations

3-23

Page 127
Image 127
Seiko Group IP-6600 Sets wind value for FAN, Preset temperature, Not reach the preset temperature, Parameter Enter a value