Seiko Group IP-6600 manual Set a print direction, Print direction setting Direction

Menu Operations

(6)Print direction setting (DIRECTION)

Set a print direction.

#DIRECTION

>01 : BI

<Parameter (Enter a choice)> BI: Print with dual direction. UNI: Print with single direction.

(7) Condition pass setting (CONDITION PASS)

Selects a conditioning pass mode for the paper.

When the print waiting condition continues for a long time, the faint print or print off may be caused by the wrinkle or smudge on the edge of the paper roll due to humidity and dust.

Use this function to avoid these problems.

Set parameters according to the operational condition.

If there is no received data and the printer waits printing even though the specified time has passed, the edge of the paper roll is fed to the front of the rear cover automatically.

(If the edge of the paper roll exists in the front of the rear cover already, this action will be skipped.)

When the print data is received and print starts, the conditioning pass (the repetition of paper feeding and rewinding) is performed automatically.

Also, when the printer is turned off, the edge of the paper roll is fed to the front of the rear cover automatically before turning off. (When using the winder, the printer is turned off immediately.)

#CONDITION PASS

>01 : NONE

Section 3 Operation Panel Menu Operations

3-19