[Picture Setting]
Selects a predefined set of picture colour settings or customises the personal setting.
•[Standard] – Original colour setting.
•[Bright] – Vibrant colour setting.
•[Soft] – Warm colour setting.
•[Personal] – Customises the colour setting. Set the level of brightness, contrast, sharpness/tint and colour saturation, then press OK.
[HDMI Setup]
Selects the HDMI video setting when you connect this Home Theater System and the TV with a HDMI cable.
•[Wide Screen Format] – Defines the wide screen format for disc play.
Option | Description |
[Superwide] | Centre position of the |
| screen is stretched less |
| than the side. Applicable |
| only to 720p and above |
| video resolution setting. |
[4:3 Pillar | No stretching of the |
Box] | picture. Black bars are |
| displayed on both sides |
| of the screen. |
[Off] | Picture is displayed |
| according to the format |
| of the disc. |
Note
•This setting is only available if you have set the [TV Display] setting to [16:9 Wide Screen].
• [HDMI Video] – Selects the HDMI video |
|
| ||
|
| |||
output resolution that is compatible with |
| lish | ||
your TV display capability. |
| |||
|
|
| Eng | |
Option | Description | |||
|
| |||
[Auto] | Detects and selects the |
|
| |
[480i], [576i], | best supported video |
| settings | |
Selects a video resolution |
| |||
| resolution automatically. |
|
| |
[480p], [576p], | that is best supported |
| Adjust | |
[720p], [1080i] | by the TV. See the TV |
| ||
[1080p] | manual for details. |
|
|
Note
•If the setting is not compatible with your TV, a blank screen appears.Wait for 15 seconds for auto recover
or switch to its default mode as follows: 1) Press . 2) Press . 3) Press ZOOM.
[Closed Caption]
Turns off or on display captions.
•[On] – Shows the sound effects in subtitles. Applicable only to discs with Closed Caption information included and the TV supports this feature.
•[Off] – Disables closed caption.
[Progressive]
If the TV supports progressive scan output, you can turn on the progressive scan mode to enhance the picture quality.Video connection through component video is required.
•[On] – Turns on progressive scan mode.
•[Off] – Disables progressive scan mode.
Tip
•There is a more detailed description available (see ‘Get started’ > ‘Turn on Progressive Scan’).
EN 43