[EasyLink Setup]
If this Home Theater System is connected to HDMI CEC compliant TV/devices, all connected devices can respond to the following commands simultaneously:
Option Description
[EasyLink] Turns off or on all EasyLink features.
To disable this feature, select [Off].
[One Touch When you press PLAY, the
Play] TV and Home Theater System are turned on. Disc play starts if there is a disc in the Home Theater System.
To disable this feature, select [Off].
[One Touch When you press and hold
Standby] STANDBY, connected HDMI CEC devices simultaneously switch to standby.
To disable this feature, select [Off].
[System When you play audio that is
Audio routed from the connected
Control] devices, this Home Theater System switches to the corresponding audio source automatically.
To enable this feature, select [On].Then proceed to [Audio Input Mapping] to scan and map all the connected devices.
[Audio Input When you map the audio
Mapping] input correctly, this Home Theater System switches to the audio from the played device automatically.
| Note |
|
|
|
|
| ish |
• You must turn on the HDMI CEC operations on the |
| ||
TV/devices before you can enjoy the EasyLink controls. |
| ngl | |
See the TV/devices manual for details. |
| E | |
• Philips does not guarantee 100% interoperability with |
|
| |
all HDMI CEC compliant devices. |
|
| |
| settings | ||
|
|
| |
[Disc Lock] |
| ||
|
| ||
Sets play restriction for specific discs. Before you |
| Adjust | |
start, place the disc in the disc compartment |
| ||
|
| ||
(maximum 40 discs can be locked). |
|
|
•[Lock] – Restricts access to the current disc. Once activated, a password is needed to unlock and play the disc.
•[Unlock] – Plays all discs.
Tip |
• You can set or change the password (see ‘Adjust |
settings’ > ‘Preferences’ > [Password]). |
[Display Dim]
Changes the brightness level of the display panel on this Home Theater System.
•[100%] – Normal brightness.
•[70%] – Medium brightness.
•[40%] – Dimmest display.
[OSD Language]
Selects the default
[Screen Saver]
Turns off or on the screen saver mode. Helps to protect the TV screen from being damaged due to over exposure to a static image for too long.
•[On] – Sets the screen saver to appear after 5 minutes of inactivity (for example, in pause or stop mode).
•[Off] – Disable screen saver mode.
EN 39