Turn on Progressive Scan
If the TV supports progressive scan output, you can connect this Home Theater System and the TV using component video connection. (see ‘Connect video cables’ > ‘Option 2: Connect to the component video jack’).
Video Setup
| TV System | On |
|
| TV Display | Off |
|
| Screen Fit |
|
|
| Picture Setting |
|
|
| HDMI Setup |
|
|
| Closed Caption |
|
|
| Progressive |
|
|
|
|
|
|
1 Turn on the TV and ensure that the TV progressive scan mode is deactivated (see the TV user manual).
2 Switch the TV to the correct viewing channel for this Home Theater System.
3 | Press DISC. | |
4 | Press | SETUP. |
5 | Press | to select [Video Setup] in the |
menu, then press .
6 Select [Progressive] > [On], then press OK.
»A warning message is displayed.
7 To proceed, select [Ok] and press OK.
»The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.
•If no picture is displayed, turn off the progressive scan mode as follows: 1) Press to open the disc compartment. 2) Press . 3) Press AUDIO SYNC.
8 Press SETUP to exit the menu.
9
Note
•During play, when progressive scan mode is on for both this Home Theater System and the TV, distorted picture may be displayed.Turn off the progressive scan feature on both this Home Theater System and the TV.
Get started English
EN 21