Listen to radio
1 Press RADIO.
2 Use the remote control to control the radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or down.
Press and hold this button to erase the current radio station from the preset list.
The preset number for other radio stations remain unchanged.
Reinstall all the radio stations
1 Press RADIO.
2 Press and hold PROGRAM for more than
5 seconds.
»All previously stored radio stations are replaced.
Note
•Check the radio antenna connection if no stereo signal is detected or less than 5 stations are detected during radio installation.
Search and store radio stations individually
1 Press RADIO.
2 Press 
/ 
.
»It starts searching until a radio station is detected.
3 Repeat step 2 until you tune to the radio station you wish to store.
•To finetune the radio frequency, press
/ 
.
4 Press PROGRAM.
»The preset station number blinks.
»If no action is carried out within 20 seconds after the above step, it exits the preset mode.
5 Press 
/ 
(or the Numeric buttons) to select a preset number to store.
6 Press PROGRAM to confirm.
Change the tuning grid
In some countries, the frequency step between adjacent channels in FM band is 50 kHz or 100 kHz.
Note
•This feature is only applicable for certain regions.
•Changing the tuning grid erases all preset radio stations.
1 Press RADIO.
2 Press 
.
3 Press and hold 
until ‘GRID 9’ or ‘GRID 10’ is displayed.
»‘GRID 9’ for 50 kHz and ‘GRID 10’ for 100 kHz.
34EN
