LG Electronics LDV-S503 System setup, Date/Time settings, Update Settings, Administrator, Log Out

System setup

Date/Time settings

Set the date/time options.

zNTP: Mark up when using the NTP (Network Time Protocol) server for time adjustment.

zDate Format: Select the date display format.

zTime Zone: Select your time zone.

zTime Server: Select your time server.

The DVR will obtain the average time among 5 public servers (rime.nist.gov, time-a.nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).

zPrivate Time Server: Enter the private time server's IP address or host name.

zSync. Interval: You can set synchronized interval with the NTP time server to 1 day, 1 hour, 1 week and 1 month.

Update Settings

Set the update options.

zItem: Select the items for updating.

-PTZ PROTOCOL: Set to PTZ PROTOCOL update.

-SYSTEM S/W: Set to SYSTEM S/W update.

zMethod: Select the update method.

-USB: Update from USB memory stick.

-Network: Update from the update server.

zUpdate Server: Enter the IP address of the update server.

Note:

If you can not update from the update server, check the TCP/IP options and the IP address of the update server.

Administrator

zAdministrator: Enter the new password for the administrator using the virtual keyboard.

zPower User: Enter the new password for the power user using the virtual keyboard.

zNormal User: Enter the new password for the normal user using the virtual keyboard.

Note:

Remember the new password. If you forget the new password please contact an authorized service center or the store where you purchased the system.

Buzzer Settings

Select the buzzer options.

zButton Beep: Makes a sound when using the but- tons.

zSensor Buzzer: Makes a sound when an alarm occurs.

zMotion Buzzer: Makes a sound when motion is detected.

Log Out

zAuto Logout: Setting the logout time.

If you mark up the option it will automatically logout at selected intervals.

zTime: You can set the auto logout time to 5 minutes, 10 minutes, 30 minutes or 60 minutes.

Hard Disk

zOverwrite: Select the overwrite recording type (Off, Normal Partition, Event Partition or All). This func- tion is possible when the selected HDD type has fully recorded.

zFull Warning: When the HDD has overflowed the warning message is displayed.

zEvent Partition: Sets the space of event partitions for event recording.

CLIENT PROGRAM

57