LG Electronics LDV-S503, LDV-S504 owner manual Mail, Emergency, Hookup And Settings

zSensor On:

-ON: Sends an e-mail when a sensor has occurred.

-OFF: Not used.

zMotion Detect:

-ON: Sends an e-mail when an motion detection has occurred.

-OFF: Not used.

zDisk Full:

-ON: Sends an e-mail when the HDD has fully recorded.

-OFF: Not used.

zAdmin PW Changed:

-ON: Sends an e-mail when the administrator password has changed.

-OFF: Not used.

zVideo Loss:

-ON: Sends an e-mail when a video signal from the camera has stopped because of a cable dis- connection or malfunction of a camera.

-OFF: Not used.

zPower On/Off:

-ON: Sends an e-mail when power is on or off.

-OFF: Not used.

Mail

zNotification

-ON: Notifies the user of unit operating information by e-mail according to notification settings.

-OFF: The notification function is not used. The mail options are dimmed.

zSMTP Server: Enter the SMTP Server address using the virtual keyboard.

If notification is set to ON and the SMTP server option is empty, the SMTP port no., user name, and password options are dimmed and the options are not set.

zSMTP Port No.: Enter the SMTP Port Number using the virtual keyboard. Typically the TCP port used for SMTP is 25. However in some cases it is better to change this port number for added flexibil- ity or security. If desired change the port number (25 or 1025 ~ 65535).

zUser Name: Enter the user name using the virtual keyboard.

zPassword: Enter the password using the virtual keyboard.

zMail Address (1-4):Enter the mail address using the virtual keyboard.

You can input up to 4 e-mail addresses.

zE-mail Test: Select [E-mail Test] to test send an e-mail.

Note:

The SMTP server, SMTP port no., user name or password settings are optional. The DVR can send e-mail directly without the use of an SMTP server or MTA (message transfer agent). In certain cases all e-mail should be forwarded to a specific SMTP server. Specify the server host name or IP address in such a case. For more detail on SMTP setup, ask your network administrator and/or mail service provider.

Emergency

zNotification:

-ON: Notifies the emergency agent about unit operating information according to your notifica- tion settings.

-OFF: Notification function is not used.

zIP/Port No.: Enter the IP/port number of the emergency agent program using the virtual keyboard. The factory default port for this function is 9002. However in some cases it is better to change this port number for added flexibility or security. If desired change the port number (1025 ~ 65535). You can set up to 9 IP/port numbers.

HOOKUP AND SETTINGS

33