Remote Control
POWER (1)
Turns DVR on or off.
LOCK
Displays the lock menu to change user type or disable system operation.
ID
Set the appropriate DVR system ID to operate via the IR Remote Controller when using the multiple DVR.
Press the ID button then press the number button within 2 seconds to select the system ID of the DVR.
If you set the system ID to “0”, you can control multiple DVR at the same time.
MAIN
Displays the MAIN menu to set the screen mode to full, 4, 6, 8, 9 or 16 screens.
SPOT
Enter SPOT mode to allow spot monitor control.
ALM.OFF
Cancels alarm activation and returns the system to the condition before the alarm was activated.
OSD
Accesses or removes the system control bar (OSD).
SETUP/ESC
Displays the setup menu or can- cels operation of the setup menu.
Arrow Buttons (b B v V)
Selects or moves between the menu options.
ENTER
Confirms menu selections.
COPY
Copies the recording data to an external device.
SEARCH
Displays the search menu.
MARK
Sets the mark point for recording search. You can set the mark point during the single channel playback of recorded data.
PAUSE (X)
Pauses playback.
STOP(x)
Stops playback.
REC (z)
Starts or stops recording.
m/c/.
Searches the recorded images in reverse or skips the recorded images.
bB
Playback or reverse playback of recorded images.
M/C/>
Forward searches the recorded images or skips the recorded images.
Number Buttons
To select the PTZ preset number, ID, or channel.
INFO
Displays or removes the system information window.
LOG
Displays or removes the System Log List window.
PTZ
Switches this unit to PTZ mode to control the connected PTZ camera.
TOUR
Tours all registered preset posi- tions in the camera.
ZOOM + / -
Zooms in/out on live images or on the playback window.
FOCUS + / -
Adjusts the focus of a camera.
IRIS + / -
Adjusts the iris of a camera.
PRESET
-SET: Registers the PTZ camera's preset positions.
-CLEAR: Deletes a memorized preset position.
-MOVE: Moves the camera to the preset position.
F1
This button is not available.
INTRODUCTION
11
