LG Electronics LDV-S503, LDV-S504 owner manual Event Settings, Sensor, Motion, Hookup And Settings

Event Settings

Sensor

zIn: Displays the number of the SENSOR-IN terminal.

zSensor Type: The alarm state can be set to either N.O. (Normally Open) or N.C. (Normally Closed).

zCamera: Select the connected camera channel to the SENSOR-IN terminal.

zOutput: Select the alarm output number for the ALARM-OUT terminal for the output alarm signal.

zArea: Select the desired motion detection area on the preview window screen.

-b / B / v / V: Moves the yellow cell box to another cell zone.

-ENTER: Selects or cancels the motion detection area at the current cell position.

-Press ESC to exit the settings.

Note:

You can select the motion detection area by using the mouse.

-To select the area: Drag & drop a cell to the right to select the motion detection area.

-To cancel area: Drag & drop a cell point of a selected cell area to the left to cancel the motion detection area.

Etc

HOOKUP AND SETTINGS

Motion

z Alarm Off

- MANUAL: Use the ALM.OFF button to stop alarm.

- POST-ALARM TIME: The alarm is stopped after post-alarm time.

zChannel: Select the channel to set motion detec- tion.

zSensitivity: Set the level of sensitivity for the creat- ed motion detection area. Sensitivity can be set from level 0 to 10.

zAlarm Out: Select the number of the ALARM-OUT terminal for the output alarm signal when motion is detected.

31