Schedule Settings
The DVR can record according to a schedule set by the user. It can also record manually regardless of date and time. The recording can be made either continuously or triggered by events (alarm and motion detection).
The recording schedule screen displays one day of the week showing the schedule of all channels over a
For each
| Time line |
Channel | |
numbers | cell block |
| Recording mode |
6.Press ENTER or click the left mouse button repeatedly to select gray to set the time for the end of the schedule. The settings cell block is highlighted.
7.Press SETUP/ESC to move to the previous menu.
To Set a Recording
Schedule for a Special Day
In addition to the weekly schedule, up to 10 specific date/time periods can be defined. To configure the specific recording schedule select Specific Dates.
1.Select the [Special Day] option.
2.Select a cell block.
To Set the Recording Schedule for a Typical Day of the Week
1.Select a day of the week.
2.Select the desired channel to schedule recording.
3.Select the time cell block for the start time.
4.Press ENTER or click the left mouse button to select a recording mode. The color of the cell blocks will change automatically.
-Gray: No scheduled recording
-Green (continuous recording): recording starts automatically from the preset time.
-Red (sensor event recording): recording starts automatically when the sensor alarm is occurs within a designated time.
-Blue (motion event recording): recording starts automatically when motion is detected within a designated time.
-Yellow (sensor+motion recording): recording starts automatically when the sensor alarm signal has input or motion has been detected.
5.Select the next time cell block of schedule time cell blocks to confirm the schedule time.
3.Press the ZOOM + button or click the [Add] icon on the special day setting menu.
The specific date selection menu appears.
4.Enter the necessary information for year, month and date.
•b / B / v / V: Press to move the columns, [OK] or [Cancel] buttons.
•b / B (or left/right mouse button): Changes the value at the current position.
•ENTER: Confirm the selection.
•Press ESC to exit the specific date selection menu.
28