Mitsubishi Electronics PD-5050, PD-6150 Setting the signal and black level for HDMI signal, Setting the video signal format, Setting the background color when no signal is being input, , ,

��

� RGB SELECT modes

One of these 7 modes must be selected in order to

display the following signals correctly.

AUTO: Select the suitable mode for the specifications

of input signals as listed in the table Computer input

signals supported by this system on page 7 of Model

Information.

STILL: To display VESA standard signals. (Use this

mode for a still image from a computer.)

MOTION: The video signal (from a scan converter) will

be converted to a RGB signal. This makes the picture

more easily viewable. (Use this mode for a motion

image from a computer.)

WIDE1: When a 852 dot� 480 line signal with a

horizontal frequency of 31.7kHz is input, the image may

be compressed horizontally. To prevent this, set RGB

SELECT to WIDE1.

WIDE2: When a 848 dot� 480 line signal with a

horizontal frequency of 31.0 kHz is input, the image

may be compressed horizontally. To prevent this, set

RGB SELECT to WIDE2.

WIDE3: When a 1920 dot� 1200 line signal with a

horizontal frequency of 74.0 kHz is input, the image

may be compressed horizontally. To prevent this, set

RGB SELECT to WIDE3.

DTV: Set this mode when watching digital broadcasting

(480P).

See page 7 of Model Information for the details of the

above settings.

Setting the signal and black level for HDMI signal

Choose the signal for the HDMI connector (PC or STB/

DVD) and set the black level.

Example: Setting the PLUG/PLAY mode to STB/DVD

Press MENU/ENTER buttons to access the MAIN MENU.

Use the �� buttons to select the SET UP menu and

then press the MENU/ENTER button.

Use the ��buttons to select the HDMI SET UP setting.

Use the ��buttons to change the HDMI SET UP setting.

��

� PLUG/PLAY settings

PC: When connected to the PC signal.

BLACK LEVEL is set to LOW automatically.

STB/DVD: When connected to the SET TOP BOX,

DVD etc.

BLACK LEVEL is set to HIGH automatically.

� BLACK LEVEL settings

LOW: When connected to the PC signal.

HIGH: When connected to the SET TOP BOX, DVD

etc. Change HIGH into LOW if the black level

appears gray.

Setting the video signal format

Use these operations to set the color systems of composite

video signals or Y/C input signals.

Example: Setting the color system to 3.58 NTSC

��

� Video signal formats

Different countries use different formats for video signals.

Set to the color system used in your current country.

AUTO: The color systems are automatically identified

and the format is set accordingly.

PAL: This is the standard format used mainly in the

United Kingdom and Germany.

SECAM: This is the standard format used mainly in

France and Russia.

4.43 NTSC, PAL60: This format is used for videos in

countries using PAL and SECAM video signals.

3.58 NTSC: This is the standard format used mainly

in the United States and Japan.

PAL-M: This is the standard format used mainly in

Brazil.

PAL-N: This is the standard format used mainly in

Argentina.

Setting the background color when no signalis being input

Set the background color to black.

Example: Setting BACK GROUND to BLACK

Press MENU/ENTER button to access the MAIN MENU.

Use the �� buttons to select the SET UP menu and

then press the MENU/ENTER button.

Use the ��buttons to select the BACKGROUND setting.

Use the ��buttons to change the BACKGROUND color.

��

� BACK GROUND Settings

BLACK: Sets the background color to black.

GRAY: Sets the background color to gray.

Setting this makes it easier to see that there is no signal.

��

��

��

��

��

��

��