To set the off timer | Mitsubishi Electronics PD-6150, PD-5050

SLEEP/OFF TIMER

To set the off timer:

The off timer can be set to turn the power off after 30, 60, 90 or 120 minutes.

1.Press the SLEEP button to start the timer at 30 minutes.

2.Press the SLEEP button to the desired time.

3.The timer starts when the menu turns off.

→ 30 → 60 → 90 → 120 → 0

OFF TIMER 30

To check the remaining time:

1.Once the off timer has been set, press the SLEEP button once.

2.The remaining time is displayed, then turns off after a few seconds.

3.When five minutes remain the remaining time appears until it reaches zero.

OFF TIMER 28

To cancel the off timer:

1.Press the SLEEP button twice in a row.

2.The off timer is canceled.

OFF TIMER 0

Note:

After the power is turned off with the off timer ...

A slight current is still supplied to the display. When you are leaving the room or do not plan to use the system for a long period of time, turn off the displays main power using the Power Button located underneath the front panel.

Page 20

Image 20

Mitsubishi Electronics PD-6150, PD-5050 manual To set the off timer, To check the remaining time, To cancel the off timer

Contents

Owner’s Guide Important Safety Instructions PD-5050/PD-6150 Precautions Important Information To avoid damage and prolong operating life Do not turn off OrbiterPage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Features you’ll enjoy include Contents of the PackageIntroduction Introduction to the PD-5050/ PD-6150 Plasma Displays When viewing videos or digital video discs Page Drawing a Power COMPONENT1 Sleep Operating Range Battery Installation and ReplacementHandling the remote control Page Turn on the plasma display and the VCR MonitorLink and MonitorLink Control External Hdmi Device with Hdcp Connection Cables To adjust the sound volume To cancel the soundTo check the settings Basic Operations To check the remaining time To set the off timerTo cancel the off timer When viewing videos or digital video discs Format Sizes Format Operation with Computer Signals Supported resolutionNarrow screen size 43 or Sxga Expand screen size Menu Controls Menu OperationsPage Restoring the factory default settings Main menu Sub menu Adjusting the picture Picture Settings MenuStoring picture settings Example Setting NR-3 Reducing noise in the picture NR Types of noise reduction Setting the color temperature Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma Curve ColorView Adjusting the pedestal level black levelFilm Mode Audio Settings Menu Image Adjust Settings MenuSelecting the Input of the audio connectors Adjusting the Position, Size, Fine Picture, Picture Adj SET UP Settings Menu Setting the language for the menusSetting the BNC connectors Setting high definition images to the suitable screen size Setting the video signal format Setting the background color when no signal is being inputVideo signal formats Back Ground Settings Turning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Resetting to the default values Refer to pages 15 & 16 for items to be reset Function Settings Menu Setting the power management for computer imagesPOWER/STANDBY indicator Setting the Input Skip Peak Bright settings Orbiter settings INVERSE/WHITE Settings Soft Focus settings Signal Information Menu Example Setting Orbiter Menu to OFF Orbiter Menu settings Example Setting Menu Contrast to Normal Type of connector D-Sub 9-pin male ApplicationMonitorLink Control Codes Reference Communication Parameters Troubleshooting Symptom Checks RemedyPage PD-5050 Specifications Signals PD-6150 Specifications Up/down Computer input signals supported by this system KHz 169Page Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity