Mitsubishi Electronics PD-6150, PD-5050 manual COMPONENT1

���������			���������
C	INPUT 3	INPUT 1	INPUT 2
			D
E			COMPONENT 1
		R/Cr/Pr
F		G/Y
		B/Cb/Pb H	RGB2/COMPONENT2
		V
G
H			MONITORLINK
I		MONITORLINK CONTROL	A	B

AAC IN

Connect the included power cord here.

BEXT SPEAKER L and R

Connect speakers (optional) here. Maintain the correct

polarity. Connect the	(positive) speaker wire to the
EXT SPEAKER terminal and the (negative)
speaker wire to the	EXT SPEAKER terminal on

both LEFT and RIGHT channels.

Please refer to your speaker’s owner’s manual.

CINPUT1, 2, 3 (BNC, RCA, S-Video)

Connect VCR’s, DVD’s or Video Cameras, etc. here.

DAUDIO1, AUDIO2, AUDIO3 These are audio input terminals.

The input is selectable. Select which video input to assign them to from the audio menu screen.

ECOMPONENT1

Connect DVD’s, Cable Boxes or High Definition sources, etc. here.

FRGB2 / COMPONENT2

COMP2: You can connect DVDs, High Definition sources, Cable Boxes, etc. here.

This input can be set for use with an

RGB or component source. (see page 22, Setting the BNC connectors.)

RGB2: You can connect an analog RGB signal and the syncronization signal.

GRGB1 (D-Sub)

Connect an analog RGB signal from a computer, etc. here.

HMONITORLINK/HDMI

Connect a digital signal from a source with a HDMI output.

IMONITORLINK CONTROL (RS-232C)

This terminal is used when operating and controlling the display externally (by external control).

3