Format Operation with Computer Signals
Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.
1.Press the FORMAT button on the remote control.
2.Within 3 seconds ...
Press the FORMAT button again. The screen size switches as follows:
→ NARROW → STANDARD → EXPAND
NARROW screen size (4:3 or SXGA 5:4)
The picture has the same size as the normal computer image.
STANDARD screen size
The image is expanded in the horizontal direction.
EXPAND screen size
When wide signals are input.
STANDARD screen size
Information
Supported resolution
See page 34 for details on the display output of the various VESA signal standards supported by the display.
When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put
Select an appropriate setting for RGB SELECT mode referring to the“Table of Signals Supported” on page 34.
*“VGA”, “SVGA” and “SXGA” are registered trademarks of IBM, Inc. of the United States.
WARNING
DO NOT OPERATETHE PLASMA DISPLAY IN NARROW (4:3) SCREEN SIZE MODE FOR AN EXTENDED PERIOD. THIS CAN CAUSE PHOSPHOR
13
