Power | Mitsubishi Electronics PD-5050, PD-6150 instruction

��

�

��

�

� �

�POWER

Push this button to turn the displays main power on or off.

�REMOTE SENSOR WINDOW

Receives the signals from the remote control.

�POWER/STANDBY Indicator

When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red.

�INPUT / EXIT BUTTON Switches the input.

The available inputs depend on the setting of BNC INPUT, RGB SELECT and HDMI SET UP. Functions as the EXIT buttons in the On-Screen Menu mode.

�LEFT/ and RIGHT/+

Functions as the ADJUST (��/ �) buttons in the On- Screen Menu mode.

�VOLUME and

Adjusts the volume. Functions as the ADJUST (�/�) buttons in the On-Screen Menu mode.

�MENU/ENTER BUTTON

Display the main menu or select a menu item.

��

The Power on/off button does not disconnect the plasma display completely from the main power supply.

Page 11

Image 11

Mitsubishi Electronics PD-5050, PD-6150 manual Power

Contents

Owner’s Guide Important Safety Instructions PD-5050/PD-6150 Important Information Precautions Do not turn off Orbiter To avoid damage and prolong operating lifePage Important No Abrasives Cleaning SafeguardsPlasma Display Screen & Cabinet Introduction to the PD-5050/ PD-6150 Plasma Displays Features you’ll enjoy includeContents of the Package Introduction When viewing videos or digital video discs Page Drawing a Power COMPONENT1 Sleep Operating Range Battery Installation and ReplacementHandling the remote control Page Turn on the plasma display and the VCR External Hdmi Device with Hdcp Connection MonitorLink and MonitorLink Control Cables Basic Operations To adjust the sound volumeTo cancel the sound To check the settings To check the remaining time To set the off timerTo cancel the off timer Format Sizes When viewing videos or digital video discs Expand screen size Format Operation with Computer Signals Supported resolution Narrow screen size 43 or Sxga Menu Operations Menu ControlsPage Main menu Sub menu Restoring the factory default settings Adjusting the picture Picture Settings MenuStoring picture settings Types of noise reduction Example Setting NR-3Reducing noise in the picture NR Changing the Gamma Curve Setting the color temperatureAdjusting the color to the desired level Making the Low Tone adjustments ColorView Adjusting the pedestal level black levelFilm Mode Adjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Selecting the Input of the audio connectors Setting high definition images to the suitable screen size SET UP Settings MenuSetting the language for the menus Setting the BNC connectors Back Ground Settings Setting the video signal formatSetting the background color when no signal is being input Video signal formats Turning the display menu on/off Setting the screen size for S1/S2 video inputSetting the position of the menu Refer to pages 15 & 16 for items to be reset Resetting to the default values Setting the Input Skip Function Settings MenuSetting the power management for computer images POWER/STANDBY indicator Soft Focus settings Peak Bright settings Orbiter settings INVERSE/WHITE Settings Example Setting Menu Contrast to Normal Signal Information MenuExample Setting Orbiter Menu to OFF Orbiter Menu settings Communication Parameters Type of connector D-Sub 9-pin maleApplication MonitorLink Control Codes Reference Symptom Checks Remedy TroubleshootingPage Signals PD-5050 Specifications Up/down PD-6150 Specifications KHz 169 Computer input signals supported by this systemPage Mitsubishi Plasma Display Panel Limited Warranty Declaration of Conformity